Fespa 2019: Zund to demonstrate digital cutting expertise

Switzerland-based Zund is set to demonstrate a range of digital cutting solutions along with its software capabilities at the Fespa 2019 which is scheduled from 14-17 May 2019 at Munich, Germany.

02 May 2019 | By Sujith Ail

At Fespa, Zund will live demonstrate G3 cutting system with its application on textile rolls of up to 3.2 m/10ft wide. Prasanna Venkatesh, managing director, Zund India, said, “Digitally printed fabrics are the hot advertising medium these days, and it comes as no surprise that innovative and universally applicable digital cutting solutions such as the Zünd G3 cutter are in especially high demand for this application.”

It will also highlight the Zund D3 dual-beam cutting system. The two beams can each accommodate up to three different tools, and depending on the cut file, deliver up to twice the productivity of a single-beam system. 

Commenting on the Zund Cut Center workflow software, Prasanna Venkatesh, said, “With a new, high-speed registration system, in seconds, the Over Cutter Camera OCC automatically captures the position of the materials to be cut and any distortions that may have occurred, and cutting begins almost immediately.”

The OCC system is now also available for the S3 and D3 cutter series. At Fespa, you will be able to see an S3 equipped with it in action.

According to Zund; print service providers, graphics professionals, packaging converters can are the target visitors for them at Fespa 2019.

From acrylics to cardboard and fabric, Zünd cutting systems can process a wide range of substrates. Equally varied are the available processing methods, ranging from cutting, folding, creasing, and perforating to routing and laser cutting. 

Zund’s RM-L routing Module system with 3.6 kW power makes it possible to perform cutting on heavy-duty materials with unrivalled performance. And with the automatic tool changer ARC, the user can turn router-bit handling into a completely automated process.

Visitors can locate Zund at stall F30, hall B5.